Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie ML28Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood...
The Simpson Strong-Tie ML28Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (10) SDS25112 Screws Dimensions: 8" Length x 2" (Flange Widths) ML28Z Information and...
The Simpson Strong-Tie ML210Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood...
The Simpson Strong-Tie ML210Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (12) SDS25112 Screws Dimensions: 10" Length x 2" (Flange Widths) ML210Z Information...
Simpson Strong-Tie HL43 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL43 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL43 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL43 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with a Hot Dipped Galvanized as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 3" (L) Bend...
The Simpson Strong-Tie L90 Reinforcing Angle is a 9" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The...
The Simpson Strong-Tie L90 Reinforcing Angle is a 9" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L90 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: Standard G90 Galvanized Length: 9" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (10) 10d x 1-1/2" Nails or (10) SD #10 x 1-1/2" Screws L90 Information and...
Simpson Strong-Tie HL43PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL43PC to connect lumber to concrete...
Simpson Strong-Tie HL43PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL43PC to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Standard G90 Zinc Coating with a Black Powder Coat provides a low level of corrosion resistance. Material: 3 gauge Finish: Standard G90 Zinc Coating with a Black Powder Coat Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 3" (L) Bend to Hole Center: 2-3/4" Bolt...
Simpson Strong-Tie HL46 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL46 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL46 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL46 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is also available with a gusset or black powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Paint Dimensions: 4-1/4" (W1) x 4-1/4"...
The Simpson Strong-Tie L90Z Reinforcing Angle with ZMax® protection is a 9" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility...
The Simpson Strong-Tie L90Z Reinforcing Angle with ZMax® protection is a 9" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L90Z angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: ZMax® Coating Length: 9" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (10) 10d x 1-1/2" Nails or (10) SD #10 x 1-1/2" L90Z...
Simpson Strong-Tie HL46HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL46HDG to connect lumber...
Simpson Strong-Tie HL46HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL46HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 3 gauge Finish: Hot Dipped Galvanized Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 6" (L) Bolt Holes: (4) 3/4" HL46HDG Heavy Angle Information and...
The Simpson Strong-Tie A33 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 3" Flange #2...
The Simpson Strong-Tie A33 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 3" Flange #2 (W2): 3" Fasteners: (8) 10d x 3" Nails or(8) SD9112 Screws A33 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low...
Simpson Strong-Tie HL49 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL49 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL49 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL49 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is also available with a black powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 9" (L) Bolt Holes:...
The Simpson Strong-Tie LS90Z ZMax® Coated Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only...
The Simpson Strong-Tie LS90Z ZMax® Coated Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS90Z Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: ZMax® Coating Galvanizing Length: 7-7/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (12) 10d x 1-1/2" Nails LS90Z Information and...
The Simpson Strong-Tie A44 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 4-9/16" Flange...
The Simpson Strong-Tie A44 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 4-9/16" Flange #2 (W2): 4-3/8" Fasteners: (8) 10d x 3" Nails or(8) SD9112 Screws A44 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a...
The Simpson Strong-Tie A66 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 5-7/8" Flange...
The Simpson Strong-Tie A66 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 5-7/8" Flange #2 (W2): 5-7/8" Fasteners: (6) 10d x 3" Nails or (4) 3/8" Bolts A66 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a...
Simpson Strong-Tie HL53 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL53 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 2-1/2" (L) Bolt Holes: (4) 1/2" HL53 Heavy Angle Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...
The Simpson Strong-Tie A88 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 22" Flange #1 (W1): 8" Flange #2...
The Simpson Strong-Tie A88 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 22" Flange #1 (W1): 8" Flange #2 (W2): 8" Fasteners: (8) 10d x 3" Nails or (6) 3/8" Bolts A88 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...
Simpson Strong-Tie HL53HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53HDG to connect lumber...
Simpson Strong-Tie HL53HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 2-1/2" (L) Bolt Holes: (4) 1/2" HL53HDG Heavy Angle Information...