Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie BA1.81/14 Top Flange Hanger is designed for 1-3/4" x 14" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn...
The Simpson Strong-Tie BA1.81/14 Top Flange Hanger is designed for 1-3/4" x 14" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top flanges...
The Simpson Strong-Tie 2-5/16" x 11-7/8" MIT3511.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed,...
The Simpson Strong-Tie 2-5/16" x 11-7/8" MIT3511.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
The Simpson Strong-Tie BA1.81/16 Top Flange Hanger is designed for 1-3/4" x 16" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn...
The Simpson Strong-Tie BA1.81/16 Top Flange Hanger is designed for 1-3/4" x 16" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top flanges...
Simpson Strong-Tie ITS2.06/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.06/9.5 installs 2" or 2-1/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top...
Simpson Strong-Tie ITS2.06/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.06/9.5 installs 2" or 2-1/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.06/9.5 installs 2" or 2-1/16" x 9-1/2"...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.06/9.5 installs 2" or 2-1/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from...
The Simpson Strong-Tie 2-5/16" x 14" MIT3514 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 2-5/16" x 14" MIT3514 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
The Simpson Strong-Tie BA2.1/9.5 Top Flange Hanger is designed for 2" x 9-1/2" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn...
The Simpson Strong-Tie BA2.1/9.5 Top Flange Hanger is designed for 2" x 9-1/2" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top flanges...
Simpson Strong-Tie ITS2.06/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.06/11.88 installs 2" or 2-1/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP...
Simpson Strong-Tie ITS2.06/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.06/11.88 installs 2" or 2-1/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2"...
The Simpson Strong-Tie BA2.1/11.88 Top Flange Hanger is designed for 2" x 11-7/8" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn...
The Simpson Strong-Tie BA2.1/11.88 Top Flange Hanger is designed for 2" x 11-7/8" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top flanges...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.06/11.88 installs 2" or 2-1/16" x...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.06/11.88 installs 2" or 2-1/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses...
The Simpson Strong-Tie 2-5/16" x 16" MIT3516 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 2-5/16" x 16" MIT3516 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
Simpson Strong-Tie ITS2.06/14 sets a new standard for engineered wood top flange hangers. The ITS2.06/14 installs 2" or 2-1/16" x 14" I-Joists faster and uses less nails than any other EWP top...
Simpson Strong-Tie ITS2.06/14 sets a new standard for engineered wood top flange hangers. The ITS2.06/14 installs 2" or 2-1/16" x 14" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the...
The Simpson Strong-Tie 2-5/16" x 18" MIT3518 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 2-5/16" x 18" MIT3518 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/14 sets a new standard for engineered wood top flange hangers. The ITS2.06/14 installs 2" or 2-1/16" x 14" I-Joists...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/14 sets a new standard for engineered wood top flange hangers. The ITS2.06/14 installs 2" or 2-1/16" x 14" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1...
The Simpson Strong-Tie 2-5/16" x 20" MIT3520 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 2-5/16" x 20" MIT3520 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie BA2.37/11.88 Top Flange Hanger is designed for 2-5/16" x 11-7/8" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid...
The Simpson Strong-Tie BA2.37/11.88 Top Flange Hanger is designed for 2-5/16" x 11-7/8" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top...